As a new customer, I am trying to connect the BYO modem to AGL NBN internet service. Can you please let me know how to fill in the Username and Password in my Modem? Thanks
I did not receive the Welcome email, can you please resent it to me?
I did wait a few hours to have a chance to talk with AGL technical team, he told me the user name and password both are AGL account number, however, I am not so lucky to connect my internet. I will spend another hour calling them tomorrow.
Thank you David. After guessing my email address, account number without "acc", I figured out the mystery.
I am sorry AGL but your Internet set up support is horrible. Instead of your useless pages, it would have helped a lot if you could just write use your account number in lower case and in full. I have not received any instructions for BYO modem settings and finally found this thread. The funny thing is that I have received my bill before my Internet. This is not nice and I am very annoyed. 😞
Hi @Zia - agreed, this should absolutely be in the instructions, and I put in a request to update those Help pages after the original post here. I don't think the change has gone through yet, but it should be on the way. Sorry you had this trouble!
I got the text 3 hours ago and have tried every combination listed below and still no luck. Please reply with exactly the PPOE settings for username and password should be!
Did this ever get solved? I have the same issue. Using my own modem and scratching my head at what username and password to use for PPPoE settings? username: account number? (Just the digits?)
After hours of mucking around with this and time on the phone to tech support, who said they would reset my internet their end. The answer was to replace the user name and password with ACCnumber in both fields. I then had to turn power off and on again, then it worked
Just some info on this, the Help Desk people don't even know what the PPPoE username/ password are. I had to ring a third time and explain the "Help" desk wasn't helpful at all and was there anyone else I could talk to. Then I got through to Tech Support.
In my case the router was from TPG (Huawei HG659) and had some settings hidden/ locked. VLAN being enabled one of them- that appears to have been my problem. Tech Support picked up on that and suggested it might be the problem.
I've managed to connect using no log in info via DHCP- so try that before PPPoE (which requires the username/ password.) That's on a HFC NBN connection.
Hi, ive just switched to agl from tpg. I have the same hg659 modem. Agl doesn't provide support for this byo modem and advised me to buy a tp link modem instead. What did you do to get your modem working?
Many thanks to those who have provided the correct info for various BYO modems on here. I agree this is essential information that should be more readily available. I've had a request in to get this updated for a while now, but sometimes the wheels turn slowly as far as getting changes made. Sorry for any frustration.
I have the tp link modem/router, when i go for quick setup, AGL os not present on the isp list so i choose others and then they asked for vlan id which i dont know what to put.
Can you set it up manually and not select an ISP? Try DHCP, it worked for me. You don't want VLAN on with AGL, that was the issue I had with my old TPG Group (Internode) supplied router.
I have connected the phone jack (on the wall) with the DSL port on the modem.
In the GUI:
I have logged into the GUI of the Telstra modem with 192.168.0.1 with default credential information.
Then, inside of Broadband tab, I have set the username and password of accXXXXXX as mentioned but the modem still show no connnection and switch to backup mode and connect to the internet through mobile sim.
For FTTP users, the other thing not mentioned anywhere is that if you have a current ISP connection and are switching to a new service you cannot use the same current physical UNI-D port on the NBN NTD box. i.e. If you have an internet connection with ISP A on UNI-D 1 port, the new ISP B will establish the new connection on UNI-D 2 port and you will have to swap over your Router's Ethernet cable to the UNI-D 2 port to use the new service.
I have also now had success with the username and password being your ACCxxxxxx number as others have already confirmed.
Little disappointed in the lack of instructions and information from AGL on this.
I had the same issue when I had my own router which had been used in a different network. The solution described here surely works. However, if your device is a modem router, you first need to change the settings in the router app to make sure that you are using the router only option. Then use the account number as the username and password and then you are good to go. Took a half a day for me to find this out.
Hi AGL / all, i just transferred from optus to AGL for NBN (HFC Connection), i have bought TP link wireless router and i have follow all the steps mentioned here with (including the ppp user name & password using the ACCxxxxxx of my AGL NBN) and i still could not connect to internet. Any help? I'm using TPLink Archer Wireless Dual Band Router AC750 that is connected directly to Unid-1 of the black NBN Box/modem.
First they added a new connection via another uni-d port rather than churning from through my existing provider.
Secondly my agl account overview shows setup in progress with no information about what to use for username/password in PPPoE connection.
Thirdly by some case of serendipity, I don't even need to do the aforementioned step, swapping my router network cable from existing provider uni-d port to the agl port without changing username/password still works. Makes me wonder what their level of security is.
Well, I spoke too soon: Am now two months into a Telecommunications Ombudsman case against AGL, still zero results as yet and still zero direct support or response from AGL.
1) with our AGL electricity plan for some years now, we have been hassled many times by AGL to add internet ect with all kinds of cash incentives. At the outset I always stated just how important it was to port our existing landline VOIP number over to that internet service for our 94 year old mother-in-law. Of course they always promised YES.
Over two months later, we still don’t have that phone. Disgusting. the 94year old barely comes out of her bedroom and has zero phone service to speak to her friends, receive calls for doctor, dentist, and vip to maintain contact with overseas UK relatives. She is effectively isolated, cannot use a touch device (arthritis) nor can hear mobile speaker phone, has heading aid etc. This one should be EASY. Incompetent.
2) AGL promised all sorts of cash back incentives on electricity bill, but have never seen this yet on my account. That ranged from Chat operator offering $300, then various followup calls to AGL variously stating that ‘the operator was wrong’, you don’t get anything against your EV plan, though to $200, then eventually $600[!]. Incompetent and confusing, I still have no rebate, nor any answer to queries about this.
3) We got small 5GB data plans for our two mobile phones given that these are used 90% at home on wifi (we’re retired). Again, zero sense to our enquiries and still cannot access a contract /plan that shows wht the charges are - both for now & after six months. At law, the telco must provide us with a contact but here we still have nothing.
Dodgy, dodgy, dodgy. If we don’t get some satisfaction soon , will move the lot. BTW former provider escalated the landline complaint to a senior person: confirmed the same landline was available and working by calling me on that number & having me return the call on that number. They also verified that they have NEVER received a porting request from AGL in the past couple of moths. Hopeless & very distressing for our 94 year old.
HI @mooch When setting up a BYO modem device, it is correct in the connecting details are the ones already on your modem. We provide the connection straight to your property and then your Modem connects and has its own security.
Crazy this thread is 2 years old and still AGL have not fixed.
Just got the SMS saying connected to AGL NBN but no email or details re what login details to use for modem and in my AGL NBN page it just says "Account setup in progress".
Send your customer details on login details to setup the modem when you connect them!
FWIW, this has been covered in detail in this same thread, hope this works for you, icld:
reset the modem with a paperclip pushed in the hole for 5 secs;
let it reboot and that ‘should’ be now auto configured;
if not, go back in this thread to check the manual setup details for the modem via web browser login. This includes using your own AACxxxx account number & setting to EWAN etc.
Wild to see these same issues happening 2 years ago and still no fix. I signed up to AGL energy earlier today over the phone and asked about how much support I'd get as I already had a modem, I was told there would be help and lots of information so the process was seamless, wouldn't be more than an hour or 2 without internet. Got an email from my old provider around 4pm saying my service had been cancelled, heard nothing at all from AGL at this stage. Called up and was told to wait 24-48 hours until it was set up!
Finally received a text just after 9pm saying my internet setup was complete, except the modem internet light is red and we have no connection. Tried to call the number on the first text, says AGL no longer use this number. Called the number on the 2nd text and sorry, out of hours because support closes at 9pm!
Around 11:30pm the internet light turned green and looks like it is all set up now. So for anyone reading, bit of patience and a hard reset of the router seemed to do the trick for me, but no where near enough information provided from AGL to know what was happening or how to set up a modem.
Have tried all the steps in this thread, hard resets, unplugging and replugging things. I can log onto the modem through the web browser but doesn't look like I have the option to change the internet connection type so I guess I'll just wait around until morning to call to actually get it set up.
David_AGL
+27 more
AGL Community Manager
•
4 years ago
Hi @FrankS ,
You'll find specific details for setting up your own device on the Set Up Your Own Device help page.
12
1
BrettBW
Switched-on
•
4 years ago
THIS IS NOT SOLVED.
I got the text 3 hours ago and have tried every combination listed below and still no luck. Please reply with exactly the PPOE settings for username and password should be!
15
0
Accepted Solution
Gazzahh
+2 more
Conductor
•
4 years ago
Both username and password are your account number. The whole thing. Not just digits. All in capital letters
0
0
DavidK
+3 more
Conductor
•
4 years ago
Just some info on this, the Help Desk people don't even know what the PPPoE username/ password are. I had to ring a third time and explain the "Help" desk wasn't helpful at all and was there anyone else I could talk to. Then I got through to Tech Support.
In my case the router was from TPG (Huawei HG659) and had some settings hidden/ locked. VLAN being enabled one of them- that appears to have been my problem. Tech Support picked up on that and suggested it might be the problem.
I've managed to connect using no log in info via DHCP- so try that before PPPoE (which requires the username/ password.) That's on a HFC NBN connection.
19
0
Accepted Solution
MarcosG
+2 more
Conductor
•
4 years ago
I had the same issue heres the solution i got after talking to AGL
User name: ACCyournumber
Password:same.
"ACC" has to be all capitals
I also performed a hard reset to the modem and the nbn box.
That did it for me.
How hard is to include this info in a welcoming email?!?! Come on AGL, you can do better
0
0
David_AGL
+27 more
AGL Community Manager
•
4 years ago
Many thanks to those who have provided the correct info for various BYO modems on here. I agree this is essential information that should be more readily available. I've had a request in to get this updated for a while now, but sometimes the wheels turn slowly as far as getting changes made. Sorry for any frustration.
7
2
agluser
Switched-on
•
4 years ago
For FTTP users, the other thing not mentioned anywhere is that if you have a current ISP connection and are switching to a new service you cannot use the same current physical UNI-D port on the NBN NTD box. i.e. If you have an internet connection with ISP A on UNI-D 1 port, the new ISP B will establish the new connection on UNI-D 2 port and you will have to swap over your Router's Ethernet cable to the UNI-D 2 port to use the new service.
I have also now had success with the username and password being your ACCxxxxxx number as others have already confirmed.
Little disappointed in the lack of instructions and information from AGL on this.
0
0
Accepted Solution
TN_AGL
+2 more
Conductor
•
4 years ago
I had the same issue when I had my own router which had been used in a different network. The solution described here surely works. However, if your device is a modem router, you first need to change the settings in the router app to make sure that you are using the router only option. Then use the account number as the username and password and then you are good to go. Took a half a day for me to find this out.
1
1
rickyr
Switched-on
•
3 years ago
Hi AGL / all, i just transferred from optus to AGL for NBN (HFC Connection), i have bought TP link wireless router and i have follow all the steps mentioned here with (including the ppp user name & password using the ACCxxxxxx of my AGL NBN) and i still could not connect to internet. Any help? I'm using TPLink Archer Wireless Dual Band Router AC750 that is connected directly to Unid-1 of the black NBN Box/modem.
0
0
mooch
Switched-on
•
2 years ago
What a joke this setup is.
First they added a new connection via another uni-d port rather than churning from through my existing provider.
Secondly my agl account overview shows setup in progress with no information about what to use for username/password in PPPoE connection.
Thirdly by some case of serendipity, I don't even need to do the aforementioned step, swapping my router network cable from existing provider uni-d port to the agl port without changing username/password still works. Makes me wonder what their level of security is.
6
0