Enabling Bridge mode - Allowing content to be served on open ports and be viewable from the internet

renkun — Fri, 05 Aug 2022 07:26:11 GMT

Hello Community,

Im trying to access a webserver on my local network from the internet. However even with firewall and port permissions are correct on my end ( Be it Windows 10 or the eero device) i still can't access said webserver.

I later contacted EERO and they told me everything is fine on my end (when they accessed my eero device) and that i was running in "Double NAT" mode.

So i researched around and it ends up that all i need to do is enable "Bridge mode" somewhere. But where?

I reached out to AGL Tech support on 3 occassions ( 2 calls and 1 chat ) And they did not know how to help when i mentioned double NAT or port forwarding?

Help appreciated!

Re: Enabling Bridge mode - Allowing content to be served on open ports and be viewable from the i...

David_AGL — Tue, 09 Aug 2022 08:38:13 GMT

Hi @renkun,

Is this article any help: https://support.eero.com/hc/en-us/articles/208276903-How-do-I-bridge-my-eeros-

topic Enabling Bridge mode - Allowing content to be served on open ports and be viewable from the internet in Modems & Hardware

Enabling Bridge mode - Allowing content to be served on open ports and be viewable from the internet

Re: Enabling Bridge mode - Allowing content to be served on open ports and be viewable from the i...